Electronics

How To Fix No Wi-Fi Networks Found Windows 10 ?


As the internet has become an essential requirement in human life, the functionality of systems greatly depends on internet connectivity. Laptops are equipped with Wi-Fi features, technically known as WLAN network card drivers, while desktops rely on Wi-Fi adapters for connectivity.

According to surveys, many Wi-Fi issues have been reported on Windows 10 and 11. There can be various reasons behind these issues. Some users may experience no network availability for networks that are enabled and accessible on other devices. Others may see networks listed but encounter difficulties connecting to new networks, resulting in limited connectivity options. In such situations, users are often restricted to connecting to previously saved or known networks. To address these issues, we have researched and compiled the following potential solutions for your convenience.

Why Are No Wi-Fi Networks Appearing?

There may be a problem with your system, ISP, and router restricting Wi-Fi networks to the list of available networks. Here are some of the reasons that actually may be the root of this Wi-Fi-related issue.

  • Wi-Fi Switched Off: First, you may need to turn on your Wi-Fi button to get the list of available Wi-Fi networks. Sometimes, the user has forgotten to turn on the wifi while switching between enabled and disable Wi-Fi. These will potentially resolve the problem.
  • Router-Related Issue: When installing a router, it comes with a specific range of coverage. Users who are beyond that range may not qualify to be listed in the available network list. Another reason could be that the router has not fully recovered after a power supply disconnection, resulting in a glitch where no Wi-Fi networks are detected.
  • Disability of Network Adapter: In certain cases, it has been observed that users turn off the network adapter for their own reasons and later forget to turn it back on. This can be a possible cause for experiencing network issues. Additionally, adapter settings can also play a role, as different regions have varying frequency bandwidths and allow for different channels.
  • Malware or Virus Attack: If your system becomes infected with a virus, you may encounter various obstacles and malfunctions. This can also result in network issues on your system.

After troubleshooting, we came to certain solutions, which are mentioned below

How to Fix the Wi-Fi Network Found Error?

When facing issues related to no Wi-Fi or WLAN network, various solutions can be considered.

1. Correctly Update the Wi-Fi Adapter Driver

If you have installed a new operating system such as Windows 10 or 11 on your system, the network driver may be the first thing that lags and becomes the primary reason for your network-related issues. Moreover, an outdated Wi-Fi adapter can also cause similar problems.

In this case, you have two options: updating the driver manually or using a third-party application specifically designed to update the most compatible and fully furnished network driver, or any other driver, on your system.

Here are the quick steps to update your Wi-Fi adapter driver.

  1. Press the “Windows + X ” button on your system.
  2. Go to the “Device Manager ” to manage your networks.
  3. Go to the “Network adapters” option and Enlarge it to get multiple views.
  4. Next, select your Wi-Fi adapter driver from the list and right-click on it.
  5. Click on the “Update driver” from the list to install the latest driver on your system.
  6. At last, click on Search automatically for updated driver software

After downloading and installing the latest driver, restart your system and check for the available networks.

2. Roll Back the Wi-Fi Adapter Driver

If you have upgraded your network driver to get the latest updated one and found it struggling in its working. You don’t need to worry about this; you only need to roll back the Wi-fi driver to the previous drivers.

To achieve you may follow this procedure,

  1. Press the “Windows + X ” button on your system.
  2. Go to the “Device Manager ” to manage your networks.
  3. Go to the “Network adapters” option and Enlarge it to get multiple views.
  4. Next, select your Wi-Fi adapter driver from the list and right-click on it.
  5. Press on the “properties” button and then Go to the “Driver” option.
  6. At last, Click on the “Roll Back Driver button” to get your previous working driver.

Note: If the “Roll Back Driver” button is not clickable or disabled for you, it means that your system does not have a backup for the previous driver. Therefore, this option is not available to you.

3. Reinstall the Corrupt Wi-Fi Adapter Driver

Sometimes, you may encounter a situation where your network driver becomes corrupted. There can be various reasons behind this, such as interruptions during the driver download or installation process.

To get rid of this issue, you must uninstall your current driver and reinstall it.

The following guide will assist you in doing this:

  1. Press the “Windows + X ” button on your system.
  2. Go to the “Device Manager ” to manage your networks.
  3. Go to the “Network adapters” option and Enlarge it to get multiple views.
  4. Next, select your Wi-Fi adapter driver from the list and right-click on it.
  5. And click on the uninstall device, this will fully remove your network driver from the system and Restart the system.
  6. Again open your “Device Manager” and Click on the “Action” present at the top of the menu.
  7. Finally, press the “Scan for Hardware Changes”.

This will bring back your missing Network adapter driver and install it. Once it’s completed again, restart your system. Still, if you cannot see your available networks check out our next option from the list.

4. Run the Network Adapter Troubleshooter

Nowadays, every latest operating system comes with built-in troubleshooter functionality. So why not rely on a troubleshooter to identify errors in network adapters? It is indeed a great option to find different solutions.

Here is a step-by-step guide for you:

  1. Go to the Windows start menu, Search for the “Troubleshoot settings” and Click on it.
  2. Now Click on the “Additional Troubleshooters or other Troubleshooters ” option.
  3. Select “Network and Internet” and click on “Run the Troubleshooter”.

It detects your system problems and provides different solutions to fix them. Once you apply the fixes and restart your system, you can see all the available networks for you.

5. Disable the Faulty VPN

VPN (Virtual Private Network) can encounter issues if not used properly. It can cause malfunctions on your system and affect network-related problems, possibly leading to the “No Wi-Fi network available” issue. To troubleshoot this, temporarily remove your VPN connection, restart your PC, and check for available networks. If the networks appear, it indicates that the VPN was the root cause of the issue.

Additionally, older versions of VPN services may not be compatible with the latest operating systems. Therefore, it is important to keep your VPN services updated to ensure compatibility and optimal performance.

6. Run a Full Virus Scan On Your Computer.

If you are facing some virus-related problems, then it is great to get an advantage of the built-in Virus Scan Feature in Windows 10 and Windows 11.

Viruses are very dangerous, they can disrupt your network connection, and you may face Wi-fi network issues.

This is how you can scan your system to protect it from viruses.

  1. Press your system’s “Windows + I” button to open the Setting.
  2. Now Go to the update and security option.
  3. Then Click on Windows Security and Go to the “Virus & threat protection option ”.
  4. Go to the “Scan options”.
  5. Select the Full Scan and click on the “Scan Now option”.

7. Temporarily Disable Your Firewall

Antivirus software serves as a saviour for your system, but it can occasionally block network connections with numerous regulations and limitations. This can result in network interruptions, preventing you from accessing available networks.

A straightforward solution to this issue is temporarily disabling your antivirus software to connect to your desired network. Once connected, you can then re-enable the antivirus software. However, we strongly advise against employing this method, as it could potentially expose your system to viruses and is risky.

8. Ensure Wi-Fi is Turned On and Working

First, you may need to turn on your Wi-Fi button to get the list of available Wi-Fi networks. Sometimes, the user has forgotten to turn on the wifi while switching between enabled and disabling Wi-Fi. These will potentially resolve the problem.

As discussed at the start of this conversation, the first thing the user should ensure is that the Wi-Fi connection is turned On or Off. In some cases, it has been found that the user has forgotten to turn on wifi while switching between enabled and disable of Wi-Fi. So It becomes necessary to perform an audit on Wi-fi operation and check whether it’s working or not.

9. Perform a Network Reset

The Majority of the users found this method very useful and got successful results after resetting the network setting. The reset option will bring back all your default settings on your system and remove all the customized settings on your network configuration.

Before performing a network reset on your system, just ensure you have backed up all your VPN configurations and other important network-related configs.

To achieve this method, you can follow these steps:

  1. Press your system’s “Windows + I” button to open the Setting.
  2. Now go to the “Network & Internet”.
  3. Then select “Advanced network settings”.
  4. Click the “Network reset button” to reset your network adapters.

Then it will automatically prompt you to restart your system, and you can check after refreshing your system for the available network.

10. Disable Airplane Mode

“No Wi-Fi network issue” will always welcome you if you have to keep enabling your Airplane mode. It may have been observed that whenever you enable the Airplane mode, your system disconnects all the network connections and radio services. So it’s pretty obvious that you will see this stated issue.

To Turn it Off, you can press the “Windows + A” button, which will immediately open the short network setting panel on your screen.  Finally, click on the Airplane mode icon if it is currently enabled.

11. Change the Adapter Region

Monitoring the region setting of your Wi-Fi adapter is essential when troubleshooting a “no network issue.” Since your wifi adapter bandwidth always matches the router setting. If they are out of sync, you may face this stated problem.

To change this property, you can check the following guide:

  1. Press the “Windows + X ” button on your system.
  2. Go to the “Device Manager ” to manage your networks.
  3. Go to the “Network adapters” option and Enlarge it to get multiple views.
  4. Next, select your Wi-Fi adapter driver from the list and right-click on it.
  5. Press on the “properties” button and then Go to the “advanced” option.
  6. And select the “channel width 2.4GHz”  in the property Field and set the value “Auto”.

Note: Not all of the network adapter possess this feature, and some others have this setting in the “Channels Number” option.

12. Change the Wi-Fi Channel Value

Last but not least, changing the channel value of the Wifi adapter to “auto”. This method has witnessed many solving this so-called “no wifi network found” issue. It’s one of the lengthy solutions on the list.

Let’s try this method, below is the step-by-step procedure to do:

  1. Press your system’s “Windows + I” button to open the Setting.
  2. Now go to the “Network & Internet”.
  3. Then select “Advanced network settings” and “More network adapter options.”
  4. Then choose your network adapter and right-click on it.
  5. Click on the “properties” button and select “Internet Protocol Version 4”.
  6. Now Click on the “Configure” button, and the system will prompt you to confirm this step; just click on OK
  7. Lastly, carefully select the “Advanced”  option and select the “802.11” channel from the channel field.
  8. On the right side of the value dropdown, select “Auto” and click OK to apply the changes.

No Wi-Fi Networks Found – FAQs

1. What could be the possible causes for not detecting any Wi-Fi networks?

Ans: There may be several reasons behind this “No wifi found” issue; we can’t mention one specific cause. The causes may be outdated Wi-Fi Adapter Drivers, a Router being out of range from your system, and a Corrupted driver are some of the possible outcomes for this issue, and one solution to this is to keep your network Adapter driver constantly updated.

2. Is the “no Wi-Fi networks found” issue limited to a specific location, or does it occur everywhere?

Ans: The occurrence of “no Wi-Fi networks found” is not solely determined by location; it can be experienced in specific and multiple locations. Various factors, including the range of routers, network configuration, bandwidth, and external interference, influence this issue.

3. Why is my Wi-Fi showing no networks?

Ans: When Wi-Fi displays no available networks, it may indicate a malfunction in the system or a hardware problem related to the router. An outdated Wi-Fi driver could cause a software issue, while a router issue could be due to being out of range.

4. Are there any power-saving settings or airplane mode enabled on the device that could affect WiFi network detection?

Ans: Yes, both power-saving mode and airplane mode have a strong impact on the detection of Wi-Fi networks. When airplane mode is enabled, it disables all network connections and radio services to comply with flight safety guidelines. Similarly, the power-saving mode may reduce the functionality of the system’s Wi-Fi to achieve power-saving goals, resulting in some network interference.

Conclusion

If you are experiencing the “No Wi-Fi Network Found” issue, we have provided the best solution. This step-by-step guide will save you time from searching for various other solutions. If you are tired of manually updating your adapter driver, we recommend relying on different third-party applications available for updates. Alternatively, you can connect your system to the router using an Ethernet connection.

We hope that our guide will assist you in resolving the issue you have encountered.