Nanotechnology

Spin defects in hexagonal boron nitride created by helium ion bombardment


Spin defects in hexagonal boron nitride created by helium ion bombardment
(a) Schematic of the negatively charged boron vacancy (VB) optical defect center in hexagonal boron nitride (hBN), (b) Photoluminescence map of an array of VB optical defects produced on a hBN flake. (c) Experimental setup for performing Optically Detected Magnetic Resonance (ODMR) measurements. (d) ODMR spectrum from the VB defects showing the resonant dips measured with zero and 10 mT magnetic fields applied.

National University of Singapore (NUS) physicists have developed a method using a focused beam of helium ions to create arrays of defects in hexagonal boron nitride (hBN) that can potentially be used for magnetic sensing applications.


Hexagonal boron nitride (hBN) is a two-dimensional (2D) material comprising of boron and arranged in a hexagonal lattice structure. It exhibits unique properties for applications in quantum sensing. Many types of defects have been discovered in hBN and one of them, the negatively charged boron vacancy (VB), is of particular interest as it possesses spin properties that make it valuable for quantum sensing applications.

In this study, a beam of high energy helium ions produced at the accelerator facility at the Center for Ion Beam Applications (CIBA) in the Department of Physics, NUS was used to irradiate flakes of hBN to generate VB optical centers. The ability to focus the ion beam to nano-sized spots and to spatially scan the beam allows for patterned arrays of optical emitters to be fabricated with high precision.

The work is the result of a collaboration between a research team led by Associate Professor Andrew Bettiol and the team led by Associate Professor Goki Eda, both from the Department of Physics, NUS. The VBoptical defect center which, was produced through the experiments run by the research team, shows some interesting properties when it is exposed to . This study was published in the journal Advanced Optical Materials.

A spectroscopic technique known as Optically Detected Magnetic Resonance (ODMR) was used to sense tiny magnetic fields in the experiments. This technique combines the principles of and optical spectroscopy to study the properties of paramagnetic materials and their interaction with electromagnetic radiation.

First, a green laser is used to excite the VBdefect center so that it emits light at a wavelength of around 810 nm, which is in the near infra-red part of the electromagnetic spectrum. A copper antenna is then used to generate a specific microwave frequency near the hBN sample. This microwave energy initializes the defect into a spin state that results in the reduction in the emitted by the defect. The microwave frequency is tuned until a drop in light intensity is detected. This happened at approximately 3.48 GHz, where a double dip in the photoluminescence intensity was observed. Once the microwave resonance frequency is found, the sensor is ready for use to detect magnetic fields.

Prof Bettiol said, “By using this unique property exhibited by hBN, a tiny magnetic field that sometimes occurs in or in magnetic materials will shift the and this will cause the light emission from the sensor to be restored. The light emission from the VBoptical defect center provides a means of optically detecting the local magnetic field.”

Prof Eda added, “hBN is a versatile material that can be readily integrated into on-chip devices. Our demonstration to create spin defects in hBN with high precision is an important step towards realizing on-chip magnetic sensors.”

More information:
Haidong Liang et al, High Sensitivity Spin Defects in hBN Created by High‐Energy He Beam Irradiation, Advanced Optical Materials (2022). DOI: 10.1002/adom.202201941

Citation:
Spin defects in hexagonal boron nitride created by helium ion bombardment (2023, July 21)
retrieved 22 July 2023
from https://phys.org/news/2023-07-defects-hexagonal-boron-nitride-helium.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.